Configure your Belkin N150 router for BSNL broadband

You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “Configure your Belkin N150 router for BSNL broadband”.

26 Responses to “Configure your Belkin N150 router for BSNL broadband”
  1. Prasad says:

    I have just bought a Belkin router N150 yesterday and still struggling to configure to BSNL network.
    What you have explained is apt for cable modem but point 5 & 6 is not applicable for Belkin Router.
    There is no “VPI/VCI” or “Encapsulation”. Instead I see “IP assigned by ISP” & “MTU”….What should we input here?…..

  2. Unnikrishn says:

    I brought a US RObotics Wireless Modem from BaHRAIN. I want to send this modem to India for BSNL Broadband. It is a wifi modem. I tried to configure manualy with BSNI Values so that in india they can simply connect to adsl line and use. But Wireless Network is not detecting. I dont know whether this will detect only if the adsl line is connect. Please advise.

    • No. The ADSL connection has no relation with Wifi part. Make sure Wifi is enabled. If that seems okay then take it to your service center, as the modem could be faulty.

  3. Kiro says:

    In configuration, Encapsulation is set to VC MUX. Everytime I change it to LLC, it changes back to VC MUX after the router restarts. Can this be the cause for my wireless connection timing out every now and then?

  4. Murali says:

    I signed up for BSNL broadband. I am having Belkin N150 F91001V1 model. Is it possible to use router directly or I must use a modem? Please help.

    Thank You in advance.

  5. shadow009 says:

    I’m using Belkin N150 modem since yesterday, the thing is i was getting an average of 1MBps before that with other modem(Dlink). And now its hardly 256 kbps . I would like to know the reason . If you could please help me in sorting this out , thank you 🙂

  6. Satyajit says:

    I am having local internet connection in hyderabd, and they provided me internet with static IP…i don’t how to assign static IP to my wireless router (Belkin N150)…..and i want to use internet as wireless internet…..please help

  7. Dr.shamnad says:

    my routers wifi connection is not working properly. after searching wifi my phone shows my computer”s name not my routers name. i connect that name with my wireless password my phone shows authentication problem. what i do.?

    • Is your laptop able to connect to your router? If yes then try turning off the ad-hoc wifi on your laptop and see what happens. Anyway you cannot connect to your laptop’s ad-hoc network using your router wifi’s password (if they both of them are not same).

  8. Sunilkumar HS says:

    I am having local internet connection in bangalore, and they provided me internet with static IP…i don’t how to assign static IP to my wireless router (Belkin N150)…..and i want to use internet as wireless internet…..please help

  9. Jagadeeshwar says: is not working in my system. Is there any fault in this site or it is a dummy site? i bought only router do i need to bought modem to for this help me in using please

  10. Om Prakash says:

    How to connfigure to service of this modem iptv & pppoe internet
    please reply

  11. i am impressed this informative…

  12. Gyana says:

    I am using Digisol routher which is DG – HR 3400. It works great but when i am going to connect with VPN service it’s not working. I hve not got any numeric pin below the router. I am totally frustrated. Is there any solution?

  13. teja says:

    I have nokia siemens modem(input-slim pin)and router with flat pin..ihave output of modem as flat pin so I connected the output to router input .but im not able to use wifi so help me plzz I have to change settings?

  14. Vikram Singh says:

    Hi ,

    i want to know if i don’t have Modem. Can i use Belkin N150 as a WIFI ??

    Vikram Singh

  15. Mywifiext says:

    i never used Bsnl Broadband.. so i don’t knew the hole setup process…thanks to this article i m able to learn new things… these steps are very different .. thanx a lot

  16. Lalit says:

    Sir have Bellingham N150 modem.What connecter is connect on ADSL port RJ 11 or RJ 45.what is pin configuration of ADSL Port.

  17. Wonderful blog… I got so many useful information from your blog if you need any help regarding Belkin then please contact us.

Check out what others are saying...
  1. Xere Blog says:

    Bsnl Broadband Connection…

    […] o use your computer to dial the BSNL connection and login. Your router has your […]…

Leave A Comment