Using Airtel Edge/GPRS Micromax MMX 610U USB device to surf the internet from Linux
You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “Using Airtel Edge/GPRS Micromax MMX 610U USB device to surf the internet from Linux”.
Is this the modem you used?
http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/Wireless+Internet/USB+Modem/Features+And+Specifications/
@justin
Yes. This is the modem.
Thanks for your write-up. I’m heading over to India for three weeks and am taking my Asus eee 901 to manage work remotely and am trying to decide between:
- grabbing an airtel usb modem once I get there, and attempting to set it up via your instructions (thanks!)
- using my unlocked blackberry curve and grabbing an airtel SIM card w/unlimited data and using that to tether to the laptop (as well as retrieve emails, etc.)
How’s your experience been with the modem?
Thanks again –
Justin
Hi justin,
The for this Airtel modem that I am using you need to get an Airtel SIM too. This modem is just a pen drive shaped adapter for the SIM. U can do that very thing by putting the SIM in ur phone and hooking it to ur laptop, but using such SIMs will be costlier to make phone calls, hence if u use them with the phone then u will need to switch the SIMs frequently, …. very inconvinient.
My Airtel Tariff is Rs.999 per month with unlimited data transfer. Speed is 15-20 kBps (i.e. 120-160 kbps).
Great post.
I’ll try this out.
hi grew
what is the max speed u got in airtel usb modem in windows & linux (ubuntu).
hi grew
what is the max speed u got in airtel usb modem in windows & linux (ubuntu).
@Thirupathy
Hi,
I get a speed of max 15-16KBps. This is very less compared to that we get on Windows (where we get 28KBps). I believe the Linux driver is to be blamed for this.
Hi Buddy,
Can you add a email subscriber to your blog, I would like to subscribe to your blog. I just couldn’t find the link for the same.
Good work
I’m a doc with interest in Computers.
@Sanjiv
Hi, as per ur request I have now added the box for email subscription. Welcome aboard.
And my apolozies to all readers as there was typo (typing mistake) in this post, where I asked you to run the command sudo wvdial.conf instead of sudo wvdialconf. Anybody who would have tried the misspelled command would had got an error. Some of you could had figured it out and rest could have been perplexed. Anyway I have fixed it now.
Can you please tell me if i can use vodafone sim on this data card. I could do so on the older airtel data cards.
@Ankit
This should very well work with your Vodafone sim. Here computer communicates with the USB hardware and not the SIM, and I guess the hardware is capable to handle any SIM. Give it a try and lemme know if it works or not.
Thanks for the reply. I tried but it gave me the following message on my vodafone sim “Enter PIN to Unlock Data Card” 10 tries remaining. The pin required was definately not 4 digit. Also in the back of the aitrel usb modem packaging was written that it was sim locked. Any ideas.
@Ankit
Oh. Ur SIM card is locked. Log into Windows and from there Choose remove PIN code. U will need the PIN code to remove it. Once removed it won’t cause for PIN anymore.
I tried but this data card is operator locked.So i am using an airtel sim now. Do you know if this works on mac?
@Ankit
If anything works in Linux then it should work in Mac as at core it is a Linux system. Anyway the Airtel people said that someone has made their USB device work on Mac.
I have a data card model MMX 610U USB divice its use air tail sim, some time i want use Idea sim, as i insert idea sim and pluck USB port the data card ask a unlock code but i have no nay unlock code kinldy give the possible way for the same.
Hello Mokarram
You just follow the steps given below for Unlocking Microimax MMX 610U Datacard from Airtel.
1. Remove the Airtel SIM from Modem then insert any other Operators Sim Card.
2. Visit http://a-zgsm.com/huawei.php and enter Your Microimax MMX 610U IMEI number (written on the Card itself). Enter the Security code then press Calculate, You will get 2 Codes Unlock Code and Flash Code.
3. Now connect your Modem to PC, a Screen will be put up to enter the Unlock code, Enter theUnlock Code generated above and you are Done. Your Card is Unlocked.
If it’s not working please forward a mail to: riyajshahmba@gmail.com
Hi Apple Grew….
Thanks for a such a simple solution to a complex problem. Please change the mistake on wvdialconf in the main text of the blog. That would save a lot of time for novices like me.
Thanks again.
Ritwik
Hey Apple Grew,
Help me in something else. I did a mistake and without doing any research bought iBall webcam. Now realized that a Logitech one would have been better for me to install on my Unbuntu Box. Could u please help on this???
Waiting….
Ritwik
Hi Ritwik,
I think the wvdialconf typo u r referring to has been fixed.
And about the iBall thing,…hmmm… u need to google it out. For a heads up try using the command lsusb after attaching ur webcam. See if it gets listed in the output. Now use that chip to model no. there and google out how to make that work in linux. I did a similar thing to make my Intex TV Tuner card work in Linux.
Dude i had a Airtel usb dongle. i need to unlock it plzzzz help
reply will be appriciated
email id : rakeshx15@yahoo.com
Dude i had a Airtel usb dongle. i need to unlock it plzzzz help
reply will be appriciated
email id : rakeshx15@yahoo.com
plzz
@Raxi
If u have forgotten ur password then u will need the PUK code from ur service provider.
bro Apple Grew I want to unlock my data card MMX 610U which is network locked. When I insert another sim it is asking for unlock code the data card is locked not sim…..so i please u to help me out and i’ve tried much to unlock it and found a prog to unlock it but i’ve to purchase it that i don’t wnt to do. I’ll give u the link so plz check it out http://www.dc-unlocker.com…..here is the prog pic http://i39.tinypic.com/12160jl.jpg
Hi,
Do anyone have AT command set for this Airtel Data card “MMX 610U” model? If yes, can u post that link here…
Regards,
Sabari.
hi all
myself sreeath from bangalore
thankyou for giving valuable information
i am using airtemodem(Microma610U)
i want to change my etwork from airtel when i insert other network sim into modem that will ask for unlock code
please help me on unlock code
sreenatha84@gmai.com
Thanks for the write up, but the micromax modem is being detected as Prolific Technologies Inc. See the output of lsusb
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 002: ID 067b:0612 Prolific Technology, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam
Bus 001 Device 001: ID 0000:0000
Will u be able to help me to configure?
Any help is appreciated.
Dear Mr Applegrew,
when i tried out the steps indicated, and finally ran connAir, I got the following error:
SIOCDELRT: No such process
CONNECTING TO Airtel…
–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: AT+CGDCONT=1,”IP”,”airtelgprs.com”,””,0,0
AT+CGDCONT=1,b [1d]IPb [1d],b [1d]airtelgprs.comb [1d],b [1d]“,0,0
ERROR
–> Bad init string.
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: AT+CGDCONT=1,”IP”,”airtelgprs.com”,””,0,0
AT+CGDCONT=1,b [1d]IPb [1d],b [1d]airtelgprs.comb [1d],b [1d]“,0,0
ERROR
–> Bad init string.
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: AT+CGDCONT=1,”IP”,”airtelgprs.com”,””,0,0
AT+CGDCONT=1,b [1d]IPb [1d],b [1d]airtelgprs.comb [1d],b [1d]“,0,0
ERROR
–> Bad init string.
ppp0: error fetching interface information: Device not found
YOUR CURRENT IP IS ”.
CONNECTION TO Airtel TIMED-OUT……..
Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If]
inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]
[netmask N] [mss Mss] [window W] [irtt I]
[mod] [dyn] [reinstate] [[dev] If]
inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject
inet_route [-FC] flush NOT supported
Can you help?
Hi sanyal,
First make sure that u have ran the ‘sudo wvdialconf’. If yes, next make sure that use ‘sudo ./connAir’ to connect instead of simply running as ‘./connAir’.
I have lost my driver CD of my usb with wire Data Card micromax mm 610u (for airtel) how can i get this. and if another alternate is available then let me know plz.
@Ishu,
Unfortunately I don’t have the CD anymore, so I don’t have the drivers. U can try googling it out. BTW to run this in Linux u don’t need the drivers.
http://airtelunlock.blogspot.com/2010/04/airtelideagrameenphonevodaphone.html
Hi,my name is SHEHZAD
I have a Airtel USB MICROMAX Data card model MMX 610U IMEI nO. 353474021874805. I want to use other sim cards like Aircel. Kindly help me to unlock it.
Thanking you.
contact me on- shehzad_roy@ymail.com or +919773635591 frm MuMbAi…
Sorry SHEHZAD I haven’t tried with another SIM and have no idea as to how to unlock the data card.
still my modem is not detected after rebooting what to do
hei grew,
I’m sylvia, i’m using airtel micromax mmx610u EDGE GPRS. and i got habituated to tht modem to browse with a very low cost. it was given by a friend,and naw he is asking me fo tht and he said it is an imported device. so haw and where can i get the same device here in india.or else plz suggest me if any other better device for me at a low cost whch works like ths modem. plz send me a reply, i’m waiting.
I bought this in India from Airtel.
hai apple grew and thanks to for this valuable information….
my question is i just now brought new huawei e1731 airtel 3G modem ..whether it is possible to work with linux (ubuntu)….. if passible what are all things i need to concentrate …
or that following steps are enough…..
thank you in advance ………….
hai grew
whether it is necessary to use ./connectionair and ./disconnectair
or directly i can use $ sudo wvdial after the edition of wvdial.conf page.
Well my script does some more stuffs like configuring the system to the Airtel connection. I am not sure if all these will work now, but it should. Just give it a try.
hello friens can u tell me how to unlock this modem to use different sim card.
I guess you should look for comment by Riyaj Shah, in this comments. He has seems to know a way. [Disclaimer: I didn't check that out.
]
Dear Applegrew,
When I ran wvdial 3g at the end, it gave the following error:
–> Timed out while dialing. Trying again.
–> Sending: ATDT*99#
–> Waiting for carrier.
–> Modem initialized.
–> Sending: ATDT*99#
–> Waiting for carrier.
ATDT*99#
CONNECT
–> Carrier detected. Starting PPP immediately.
–> Unable to run /usr/sbin/pppd.
–> Check permissions, or specify a “PPPD Path” option in wvdial.conf.
Well put a ‘sudo’ before the command, i.e. type : sudo ./connAir
Similarly to disconnect you need to use ‘sudo’.
Hi,
Can I use any SIM (I mean Airtel/Vodafone) in micromax device or is it service provider specific?
@Sneha
The device I had allowed me to change the SIM, but I am not sure if current devices will allow that. It is better to ask to vendor before buying.