Router settings for TATA Indicom Broadband connection.

I have a Netgear ADSL Wifi router. The router provided to me by TATA Indicom was below par so I decided to use my router. Below are the settings you need to configure your router. Note that you need a router with ADSL modem (like my Netgear DG834G).

Multiplexing method: LLC-Based
DSL Mode: ADSL2+
VPI: 0
VCI: 32
Encapsulation: PPPoE (Point to Point Protocol over Ethernet)
Login: (e.g. chitran@vsnl.com, check the receipt given to you for your email ID)
Password: (default is reset123)
That’s it. These the critical values you need. Particularly if you set VPI and VCI values to anything but the ones listed above then you will not be able to connect to the net.
Happy surfing!
PS: If your plan provides static IP address then chances are that you will be using completely different protocol, e.g. maybe MER (MAC Encapsulated Routing) instead of PPPoE. In that case the above giude is not useful for you.
Comments
7 Responses to “Router settings for TATA Indicom Broadband connection.”
  1. Jawahir says:

    Can yu Post the details for a static ip.

  2. Anshul says:

    Thanks a lot dude, it worked for me when I followed the steps.

  3. Sandeep says:

    I have Netgear DGN2200 tried these setting but no internet connection even tata broadband engineer not able to setup. I bought Netgear DGN2200 2 week ago.

    Any help?

  4. Sandeep says:

    Thanks Nirupam. It worked for me.

    For those using Belkin Wireless Modem you will require the following as well for PPPoE interface-
    Service Name: TATA COMM
    IP assigned by ISP: Yes

    Sandeep

  5. rajiv says:

    netgear adsl router installation process,

    Please find below NETGEAR ADSL2+ router Installation process,

    Step1– open your browser and type there routerlogin.net and your router user id is “admin” and password is “password”.

    Step2- opens your basic setting option.

    Step3- Select option yes against the question of does your router require login password.

    Step4- Encapsulation option select “PPPOE (ppp over Ethernet)” option.

    Step5- Type your BSNL user id and password and then apply setting.

    Step5- opens your ADSL setting option and select there Multiplex Method LLC based.

    Select ( “VPI 0 )” option manually and applies setting.

    Select ( VCI 35) for BSNL for TATA ( VCI 39) for MTNL ( VCI – 32) and apply setting.

    DSL Mode will be auto multi – mode.

    Your ADSL router setting has been done.

    To give security and password to your wireless router please open wireless setting option and give there user name and password as per your wish.

  6. Amit says:

    I’m using a Tata Docomo wired connection. I want to configure a Prima Tel ADSL 2 router. Can someone help me with the configuration steps for PrimaTel ADSL 2 router.

Leave A Comment