Configure your Belkin N150 router for BSNL broadband

  1. Login to your router dashboard. It should usually be at http://192.168.2.1.
  2. Now under “Inertnet WAN” click on “Connection Type”.
  3. Here select “PPPoE” and click on Next.
  4. Provide your BSNL username and password. Leave the “Service Name” field blank.
  5. For “VPI/VCI” field provide 0 and 35 as values.
  6. For “Encapsulation” field choose “LLC”.
  7. Leave all other fileds to their default values.
  8. Now Apply Changes. It will take around 30 seconds for the router to restart.
  9. Notice the top-right corner of the page and check the status. If it says “Connected”, then you are good to go.
  10. Else click on the “Home” link near that. On the home page click on Connect button.

Now you should be able to use this Wifi router with your BSNL broadband. Happy surfing. 🙂

PS: Now you no longer need to use your computer to dial the BSNL connection and login. Your router has your BSNL username and password, it will do the dialing and logging in.

28 Comments

  1. I have just bought a Belkin router N150 yesterday and still struggling to configure to BSNL network.
    What you have explained is apt for cable modem but point 5 & 6 is not applicable for Belkin Router.
    There is no “VPI/VCI” or “Encapsulation”. Instead I see “IP assigned by ISP” & “MTU”….What should we input here?…..

    Reply

  2. I brought a US RObotics Wireless Modem from BaHRAIN. I want to send this modem to India for BSNL Broadband. It is a wifi modem. I tried to configure manualy with BSNI Values so that in india they can simply connect to adsl line and use. But Wireless Network is not detecting. I dont know whether this will detect only if the adsl line is connect. Please advise.
    Regards
    Unnikrishnan
    Bahrain

    Reply

    1. No. The ADSL connection has no relation with Wifi part. Make sure Wifi is enabled. If that seems okay then take it to your service center, as the modem could be faulty.

      Reply

  3. In configuration, Encapsulation is set to VC MUX. Everytime I change it to LLC, it changes back to VC MUX after the router restarts. Can this be the cause for my wireless connection timing out every now and then?

    Reply

  4. Hi,
    I signed up for BSNL broadband. I am having Belkin N150 F91001V1 model. Is it possible to use router directly or I must use a modem? Please help.

    Thank You in advance.

    Reply

  5. I’m using Belkin N150 modem since yesterday, the thing is i was getting an average of 1MBps before that with other modem(Dlink). And now its hardly 256 kbps . I would like to know the reason . If you could please help me in sorting this out , thank you 🙂

    Reply

  6. I am having local internet connection in hyderabd, and they provided me internet with static IP…i don’t how to assign static IP to my wireless router (Belkin N150)…..and i want to use internet as wireless internet…..please help

    Reply

  7. my routers wifi connection is not working properly. after searching wifi my phone shows my computer”s name not my routers name. i connect that name with my wireless password my phone shows authentication problem. what i do.?

    Reply

    1. Is your laptop able to connect to your router? If yes then try turning off the ad-hoc wifi on your laptop and see what happens. Anyway you cannot connect to your laptop’s ad-hoc network using your router wifi’s password (if they both of them are not same).

      Reply

  8. I am having local internet connection in bangalore, and they provided me internet with static IP…i don’t how to assign static IP to my wireless router (Belkin N150)…..and i want to use internet as wireless internet…..please help

    Reply

  9. 192.168.2.1 is not working in my system. Is there any fault in this site or it is a dummy site? i bought only router do i need to bought modem to for this help me in using please

    Reply

  10. I am using Digisol routher which is DG – HR 3400. It works great but when i am going to connect with VPN service it’s not working. I hve not got any numeric pin below the router. I am totally frustrated. Is there any solution?

    Reply

  11. I have nokia siemens modem(input-slim pin)and router with flat pin..ihave output of modem as flat pin so I connected the output to router input .but im not able to use wifi so help me plzz ..do I have to change settings?

    Reply

  12. i never used Bsnl Broadband.. so i don’t knew the hole setup process…thanks to this article i m able to learn new things… these steps are very different .. thanx a lot

    Reply

  13. Sir have Bellingham N150 modem.What connecter is connect on ADSL port RJ 11 or RJ 45.what is pin configuration of ADSL Port.

    Reply

Leave a Reply to Lalit Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.